DDE2TCP, Collect and pipe data via TCP/IP:

Driver/Program developed to gather real-time data from DDE capable programs and transmit it via TCP/IP. This program was specifically designed for gathering real-time information from MMI programs such as FIX, WONDERWARE, GENESIS, LABTECH NOTEBOOK and send it to UNIX machines. It will gather any type of information via DDE and transmit it via TCP/IP SOCKETS to any destination and can support multiple DDE conversations. "DDE2TCP" will run on WINDOWS v3.1, WINDOWS/NT and WINDOWS 95. Price $395.00
 

BARBER COLEMAN MAQ PID CONTROLLERS:

This driver is available under DOS, WINDOWS and OS/2. This is a read/write driver that will not only talk to an individual PID controller but it can talk over the BARBER_COLEMAN multi drop network. This means that an individual PID controller can be linked to a FIX SCADA unit but have access to 32 other PID controllers on the network. Price $750.00
 

GAUGEPORT:

by Observation Systems, this driver is available under DOS, WINDOWS and OS/2. This driver is a read only driver and will allow the interface to a myriad of gauges measuring devices. Price $750.00
 

PMS 2500 PARTICLE COUNTER:

This driver is available under DOS and WINDOWS. It is a read only driver that will read serial output of the particle size populations in a gas stream.Price $1000.00
 

PMS Particle Measuring Systems Interface:

This driver is used to communicate with the LASAIR HS110 Aresol particle counter and also the HSLIS Particle Counter for Liquids. This a Read ONLY driver via RS-232,RS-422/485 or TCP/IP (via a Lantronix device). This driver will read all Real Time data transmitted. In the case of the LASAIR unit the driver will handle the option of multiple samples taken by a single LASAIR unit. The driver can handle up to 24 different manifold positions. In the case of the HSLIS liquid particle counter, for data to be retrieved the unit must have the PDSPB data device attached. The driver can accomidate up to 4 LASAIR units and 4 HSLIS units (Lantronix required) simmultaneously. FIX/NT and Wonderware are supported. A standalone version is also available. This product is available through Custom Technology. Price $2500
 

AEONIC GAUGING SYSTEM:

This driver links directly into the DECNET interface system that AEONIC provides. This is available under DOS, WINDOWS and OS/2. It is primarily a read only driver for all data that is generated during extrusion such as: 

• Average Thickness 
• Average Width 
• Die bolt positions 
• Standard Deviation 
• Roll Length 
• Lot Number 
• Commodity and much more......... 

Price $1500.00 

This driver is available under DOS and WINDOWS. This driver is a read only program gathering die bolt information on a timely basis. Price $1500.00
 

ATI Beta Gauge:

This driver is used in conjunction with Analog Devices CTM-05 counter card and is available under DOS and WINDOWS. It will allow the user to display the beta count over time. If the user attached the system to a moving platform over the target web, the driver allows for multiple stored/displayed values. This allows the user to show how die bolt positions effect thickness of the extruded plastic. Price $1000.00
 

STAEFA Serial Interface Driver:

This driver is used in conjunction with the ATKINS TTL convertor. This program would be used to Read and Write to Smart I and Smart II I/O cards. It will allow the replacement of the main STAEFA controller card. This program also can be easily used with any MMI system i.e. FIX,Wonderware,Factorylink. Price $2500

TIBCO Rendezvous Message Bus:

This driver is used to interface the TIBCO message bus. WONDERWARE and FIX MMI systems can subscribe to any message transmitted accross the TIBCO BUS.  This driver
is a READ/WRITE driver.Price $2500
 

CSI, Control Systems International Interface:

This driver is used to communicate with control devices that are connected to the sublan of a MRI. This a Read ONLY driver via RS-232,RS-422/485. It will allow the replacement of CSI's main MRI controller card. This program also can be used with any MMI system i.e. FIX,Wonderware,Factorylink. Price $2500
 

ANDOVER HVAC:

This driver is available under WINDOWS only. This driver has two parts that can be purchased separately but can also work together on the same SCADA node: 
 

• S- PORT: This function monitors all unsolicited alarms that are generated by the ANDOVER system and places the data into the FIX database for use by the user for VIEW, HISTORICAL and ALARMING. This is mostly a read only function. Price $1800.00 

 
• C- PORT: This Function allows the user to read, write and enable different ANALOG or DIGITAL points within a particular master unit. The driver also polls based on which individual screen is currently being viewed. This is done so that time is not wasted polling for information that is not currently being viewed. Price $2500.00 

 

This FIX, WONDERWARE, LABVIEW driver will allow the real time interface to the CM4 via RS-232 or RS-422. There are 64 different I/O properties available to the FIX system, all with a maximum of 1.5 sec refresh rate. The CM4 allows four gas streams to be analyzed simultaneously. The driver is available for: WINDOWS FIX, NT DMACS, Specifix, WONDERWARE, LabView and as a stand alone program for windows. Price $2500.00
 

ZELLWEGER - MDA Scientific G.D.A.C.S. Multipoint Gas Analyzer

This driver has all of the same capabilities as the CM4 driver. The program, however, is for the older G.D.A.C.S. system and is a READ ONLY driver. The driver is available for: WINDOWS DMACS, NT DMACS, Specifix and as a stand alone program for WINDOWS. Price $750.00
 

ZELLWEGER - MDA Scientific System 16 Gas Analyzer

This driver has all of the same capabilities as the CM4 driver. The program, however, is for the System 16 system which can handle 16 simultaneous gas streams. This driver is a READ ONLY driver. The driver is available for: Wonderware, NT FIX, Specifix and as a stand alone program for NT. Price $2500.00
 

WIZDOM CONTROLS SOURCE CARD:

This driver is a full functioning bi-directional link into the WIZDOM source card. This is a dual ported RAM interface available for FIX, GENESIS, WONDERWARE, PARAGON, FACTORYLINK. This driver is a bi-directional link that can support over 5,000 I/O points with an update speed of 1.1 sec. This program is also available as a a stand alone WINDOWS program. Price $750.00

Custom Technology is also available to produce custom drivers and custom installations at a reasonable price. For more information feel free to call us, or send us a message.